Dijital Yüzey Direnci Ölçüm Kiti

ESD / Temiz Oda → Test - Ölçüm ve Görüntüleme Ekipmanları → Surface Resistance Testers → Dijital Yüzey Direnci Ölçüm Kiti

Sipariş No : CW-19290

Dijital Yüzey Direnci Ölçüm Kiti

ESD Yüzey Direnç Ölçüm Test Cihazı, Yüzey Direnç Ölçümü Kiti, Taşıma Çantalı

  • Large OLED display

  • Displays resistance mantissa and exponent, temperature, relative humidity and test voltageNEW internal memory

  • Stores and recalls up to 100 measurements. Captures resistance, temperature, humidity and test voltageNEW measurement stability modes

  • Sets the 15-second electrification period for test requirements*NEW electrode spacers

  • Spaces the 2.27 kg electrodes to 25 cm and 91 cm for resistance point-to-point (Rtt) measurement requirements of IEC 61340-2-3 and IEC 61340-4-1NEW measurement location labels (pack of 25)

  • Labels and tracks areas and materials measured for surface resistanceDigital compliance verification surface resistance meter kit

  • Measures resistance point-to-point (Rtt) and resistance-to-ground (Rtg) of worksurfaces, flooring systems, garments, packaging, and other materials in accordance with IEC 61340-2-3 and IEC 61340-5-1Resistance range: <1.0 x 103 to >1.0 x 1012 Ohms

  • Determines if a surface is conductive, dissipative or insulative for ESD control applications in electronics manufacturing or handling environmentsUnder load test voltages (10 V or 100 V ±5 %)

  • Meets ANSI/ESD S20.20 resistance testing requirements for product qualification and compliance verification222002 concentric ring probe accessory 

  • Measures surface resistance per IEC 61340-2-3, the test method listed in Packaging Table 3 in EN 61340-5-1NEW 19295 handheld electrode accessory

  • Meets resistance measurement requirements of IEC 61340-2-3, IEC 61340-4-1, ANSI/ESD STM2.1 and IEC 61340-4-5NIST calibrated with certificate included

  • Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology. For more information on the calibration of Desco products, see Calibration

  • Made in the United States of America


    • Kit includes:

    1. 1 Digital Surface Resistance Meter

    2. 2 Test Leads, 1.5 m Length

    3. 2 2.27 kg Electrodes

    4. 1 Electrode Spacer, 25 cm

    5. 1 Electrode Spacer, 91 cm

    6. 4 AA Alkaline Batteries

    7. 1 Ground Plug Adapter

    8. 1 Gator Clip

    9. 25 Measurement Location Labels

    10. 1 Plastic Carrying Case

    11. 1 Certificate of Calibration


      12. *Measurement stability modes:
      Auto stabilisation enables a 15-second electrification period when the measured resistance is 1 x 1010 ohms or greater to maintain test accuracy.Fixed stabilisation complies with ANSI/ESD S4.1 and enables a 15-second electrification period when the measured resistance is 1 x 106 ohms or greater.

Teknik Şartname

Videolar

Ek Dosyalar (Katalog-Broşür-Manual)

99026-ENG.pdf

Bağlantılı Ürünler

0